|Robinson Armaments M-96 rifle in standard configuration|
In 2004, Robinson Armament unveiled a new design, which, while retaining basic modular concept, stepped out of Stoner pattern in several aspects. The new XCR rifle was submitted to SCAR special forces rifle trials, which were won by FNMk.16 and Mk.17 SCAR rifles. Since mid-2006, RobArm XCR rifles are sold on civilian US market in semi-automatic only versions; selective-fired versions are available only for government buyers.
|Robinson Armaments M-96 rifle in top-feed ("Bren-type") configuration with short barrel|
RobArm M-96 rifles were built on single,universal receiver, made from stamped steel. These receivers hosted quick-detachable barrels and basic gas-operated actions with long-stroke gas piston and rotary bolt locking. Receivers had mounting points for trigger units on "top" and "bottom" surfaces, and feed unit mounting points on "bottom" side only. In standard rifle configuration receiver is put with gas tube below the barrel, and magazine and trigger units mounted on the underside of weapon. In the "Bren-type" configuration, receiver is turned upside down so gas tube lies above the barrel, and magazine inserts from the top; the trigger unit is installed on the opposite, "bottom" side of weapon. Both trigger unit and magazine feed units also were made from stamped steel. Barrels with appropriate front sight mounts were used for every configuration, and rear sight block was attached to the mounting points on receiver, opposite to trigger unit. Guns were fitted with detachable, solid polymer stocks, and detachable plastic forends / handguards. In "standard" rifle and carbine configurations, charging handle was located at the left side of receiver, and ejection was to the right. In the"Bren-type" configurations, charging handle was on the right, and ejection was to the right (because the receiver was turned "upside down").
|Robinson Armaments M-96 RAV-02 assault rifle (selective-fired), version chambered for 7.62x39 mm|
RobArm XCR rifle is quite different from M-96. Most important, it abandoned the idea of single receiver with detachable units, that can be turned upside-down. XCR rifle reverted to the more common upper / lower receiver configuration, in which upper receiver hosts removable barrel, gas system, and basic action with rotary bolt locking. Gas system features traditional gas piston, and four-position gas regulator. Bolt has three locking lugs and locks into the barrel extension. Lower receiver hosts trigger unit and pistol grip, and has an integral magazine housing. Manual safety (which doubles as fire mode selector in "military" versions) is located on lower receiver, above the pistol grip, and can be located on left side only or both sides of receiver. Bolt catch release button is located at the rear of magazine veil, just ahead of trigger guard. Cocking handle is located at the left side of upper receiver, and can be used to assist the bolt closure.
|Robinson Armaments XCR rifle, caliber 5.56x45 mm, with open sights (detachable and folding).|
XCR rifles are fitted with side-folding skeleton buttstock. Top of receiver is shaped into integral Picatinny type accessory rail, with three additional rails located around the barrel at 3, 6, and 9 o'clock positions. For more convenient use, these rails can be covered with special polymer panels, that form rifle's forend / handguard. There are no standard sighting equipment "as is", but any compatible open or telescopic and night sights can be installed using Picatinny rail.
|Robinson Armaments XCR rifle, caliber 5.56x45 mm|
|Robinson Armaments XCR rifle, caliber 6.8x43 mm Remington SPC, with Trijicon ACOG telescope sight|
Caliber: 5.56x45 NATO; also 6.8x43 Remington SPC and 7.62x39 M43
Action: Gas operated, rotating bolt
Overall length: 959 mm (stock open), 696 mm (stock folded)
Barrel length: 407 mm (other lengths available)
Weight: 3.4 kg
Rate of fire: n/a
Magazine capacity: 30 rounds