Bushmaster M-17s

This interesting weapon started its life in around 1982, when a small Australian company Armstech decided to develop a new assault rifle for Australian army trials. Prototype weapons were produced in a very short amount of time, but Australian army eventually selected for adoption an already established foreign weapon, the Austrian-made Steyr AUG. Nevertheless, Armstech kept developing and produced a series of interesting weapons, all in bullpup layout (and some firing caseless ammunition of indigenous design), but neither went past prototype stage. In around 1990 Armstech went belly up, and rights to the rifle that fired conventional ammunition was sold to another Australian company, known as Edenpine. Further development at Edenpine resulted in SAK 30 prototype, but company found that there's no market for such weapon in peaceful Australia. Therefore, in early 1990s Edenpine found an American company, Bushmaster Firearms Inc, which finalized the prototype and put it into production in 1994, just before the infamous "Assault weapons ban". Bushmaster designated new rifle as M17s and produced it in somewhat limited numbers up until 2005, when it was dropped from Bushmaster products line. It must be noted that demise of Bushmaster M17s was caused mostly by general preferences of American gun market, which is rather shy on bullpups; therefore, Bushmaster company decided to concentrate on much better selling rifles, patterned after Ar-15 / M16 or M4.

The M17s is a self-loading rifle, and thus cannot be classified as a true "assault rifle". Nevertheless it could make a very good paramilitary of home defense weapon; it is also good plinker and all-around compact rifle in .223 caliber, combining rifle-length barrel with carbine-style short overall length.

Bushmaster M-17s rifle, right side view, with installed Red Dot sight.

The M17s rifle is gas operated weapon that uses short-stroke gas piston, located above the barrel. Locking is achieved by rotary bolt with seven lugs; bolt is hosted in massive Ar-18-style bolt carrier, which rides on dual guide rods. The charging handle is somewhat unusual as it forms the rear part of the integral carrying handle, and therefore it is fully ambidextrous. The cocking handle slot on the top of receiver is covered by sliding dust cover. The receiver of weapon is a composite affair, consisting of extruded aluminum upper part and polymer lower part. Upper part houses barrel, gas system and bolt group. Lower receiver is made integral with pistol grip and houses trigger unit and magazine housing. Upper and lower receivers are connected by two push-out cross-pins. Ejection port is made on the right side of the weapon only, and there's no provisions for left-hand ejection. Nevertheless, weapon is more or less ambidextrous in regard to controls, as push-button safety (located at the front of triggerguard) and magazine release buttons are made ambidextrous too. M17s will accept all M16 / Ar-15 type magazines. The top of the carrying handle is fitted with Weaver-style accessory rail which will accept any compatible scope mounts, and also hosts a rudimentary backup open sight.

Caliber: 5.56x45 mm (.223 Remington)
Action: Gas operated, rotating bolt
Overall length: 760 mm
Barrel length: 546 mm
Weight: 3.72 kg empty
Magazine capacity: Accepts all M16/AR15 magazines, standard capacity 30 rounds

Tribute to Mikhail Kalashnikov and the AK-47

Tribute to Mikhail Kalashnikov and the AK-47

Armalite AR-18

The AR-18 rifle had been developed by the Armalite company (USA) by the George Sullivan, Arthur Millerand Charles Dorchester in the early 1960s. This rifle was designed for the international military market as a replacement for the AR-15 project, which had been sold to the Colt in 1959 by the Armalite's parent company, Fairchild Aircraft and Engine Corp. The AR-18 was designed as a competitor to the AR-15, which could be made at much less expenses and on simplified machinery, with the view to sell the manufacturing licenses for AR-18 to the third world countries. The AR-18 was a really successful design from a technical standpoint, but it come out too late to compete with both officially accepted and adopted AR-15/M16 rifle of American origin and already widespread AK-47 rifle of the Soviet origin. The Armalite company by itself made very few specimens of this rifle.The manufacturing license was consequently sold to the British company Sterling Armaments Co and to the Japanese company Howa Machinery co, but all three companies produced hardly over 20 000 rifles total, and the production of the AR-18 was ceased circa 1979 for some 20 years. It was originally available in the military AR-18 (selective fire) and AR-18S (selective fire, with short barrel) versions,and in AR-180 semi-automatic only version. But in the year 2001 the Armalite company resurrected the AR-180 design, in somewhat modified form. New rifle,intended mostly for the civilian and law enforcement markets, featured the same AR-18 layout and action, but discarded the stamped steel lower receiver and replaced it with the plastic lower, with AR-15-compatible magazine housing and AR-15-type trigger unit, which allowed for wider spare parts availability. The original folding buttstock and flash suppressor are replaced with the plastic fixed buttstock of the same shape and the muzzle recoil compensator, to comply with the current US firearms laws. The price of AR-180B is slightly lower than of the similar basic AR-15 type rifle, and the available user reports aboutAR-180B are generally quite positive.

Original AR-18 assault rifle, made by the Sterling Armaments of UK

The most interesting point about the AR-18 is that, while being a commercial failure, it served as a platform for some further development, which took place in various countries. First, the AR-18 design obviously served as a starting point for the ill-fated British SA80/ L85 bull-pup assault rifle, which can be loosely described as a bullpup-ed and weakened AR-18. Second, the AR-18 served as a starting point for the Singapore SAR-80 assault rifle, designed by the Chartered Industries of Singapore with the help of the George Sullivan (who designed the AR-18 itself). And third, the relatively new German Heckler - Koch G-36 assault rifle bears a lot of similarity internally to the AR-18.

Schematic view of the AR-18 (from the original Armalite patent, issued in 1968)

The AR-18 is a gas operated, magazine fed, air cooling selective fire rifle.The gas action features a short piston stroke, rotating bolt locking mechanism.The gas chamber and piston are located above the barrel, and the piston has the cupped head and its own return spring. The square-shaped bolt carrier is mounted inside the receiver on two guide rods, with each rod carrying its own return spring. Both rods are linked by the special end plates so the whole bolt / bolt carrier / return springs / guide rods assembly can be removed from the rifle as a single unit, which greatly simplifies the field maintenance. The rotating bolt is somewhat similar in construction to the AR-15 bolt, and is rotated by the bolt pin, which is engaged in the curved cam track, cut in the bolt carrier. The charging handle is fixed to the right side of the bolt carrier and reciprocates when gun is fired.

The "reincarnated" AR-180B of recent manufacture. Semi-automatic only and with plastic lower receiver with integral pistol grip

The receiver is made from stamped sheet steel and consists of two parts - upper and lower. Both halves of the receiver are hinged one to another at the front of the receiver. The upper and lower parts are interlocked by the rear ends of the bolt carrier guide rods. AR-18 is field stripped by pressing the guide rods forward by the special lever at the rear of the receiver, then by the folding the lower receiver down and forward.

The controls consist of the trigger, safety - fire mode selector at the left side of the receiver (similar to one found on AR-15 / M16 type rifles), and the bolt stop. The available fire modes are single shots and full auto, or only single shots in AR-180 and AR-180B.

The forearm, the pistol grip and the buttstock are made from black plastic. The buttstock folds to the side to save the space,if required, and AR-15 can be fired with butt folded. The sling attachment points are located on the barrel, just ahead of the forearm, and at the butt of the pistol grip, so the sling position is not affected by the position of the foldable buttstock.

The sights consist of the hooded front post and the"L"-shaped flip-up diopter rear, also protected from sides by large"dog ears". Each AR-18 also was fitted with the scope mount at the top of the receiver by standard.

Caliber: 5.56x45 mm (.223 Remington M193)
Action: Gas operated, rotating bolt
Overall length: 940 mm (738 mm with folded stock)
Barrel length: 464 mm
Weight: 3.09 kg with empty 20 rounds magazine
Magazine capacity: 20, 30 or 40 rounds