Tuesday, September 14, 2010

UZI / Mini UZI / Micro UZI submachine gun




MORE?


Uzi submachine gun with metallic buttstock in opened position


Uzi submachine gun with metallic buttstock in folded position


Uzi submachine gun with fixed (detachable) wooden buttstock


Mini-Uzi submachine gun with shoulder stock folded



Mini-Uzi submachine gun with shoulder stock opened


Micro-Uzi submachine gun with shoulder stock opened


Micro-Uzi submachine gun with shoulder stock folded
 
UZI Mini UZI Micro UZI
Caliber 9x19mm Luger/Para 9x19mm Luger/Para 9x19mm Luger/Para
Weight, kg 3,7 2,7 1,5
Length, mm (stock closed / open)470 / 650 360 / 600 250 / 460
Barrel length, mm400 197 117
Rate of fire, rounds/min 600 950 1250
Magazine capacity, rounds25 , 32 20, 25, 3220
Effective range, meters200 100 30

The UZI submachine gun was developed in Israel by designer Uziel Gal in around 1949, and manufactured by IMI (now IWI Ltd) since about 1951. UZI had been adopted by police and military of more than 90 countries, including Israel (now only in reserve), Germany, Belgium. It was also produced under license in Belgium by FN Herstal, and without license - in Croatia. More compact versions, Mini and Micro UZI, which were developed in 1982 and 1983, respectively, are adopted by many police, special operations and security units around the world, including Israeli Isayeret, US Secret Service etc.

An interesting question is the ancestry of the design of Uzi submachine gun. Most sources state that it was inspired by the Czechoslovak SA 23 submachine gun, which also had magazine in pistol grip and wrap-around bolt. This submachine gun was adopted in 1948, with production commencing in 1949. There are some doubts that it could reach the shores of Israel the same year it was born. On the other hand, British army tested several prototype weapons of the same basic layout as early as 1944 (see MCEM-2), and it is possible that Uziel Gal had learned about this layout from UK. It is also possible that he "invented" this layout on his own - after all, the very same basic layout has been used in semi-automatic pistols for a good 50 years.

The UZI submachine gun is blowback operated weapon which fires from open bolt. Mini- and Micro-Uzi submachine guns are produced either in open-bolt or closed-bolt versions; in the latter variation, weapon is equipped with separate striker and additional spring. The receiver is made from stamped steel, with trigger unit and pistol grip pinned to its bottom at the center. The bolt is of "wrap-around" type, with most of its weight located in front of the breech face. The Micro-Uzi has an additional weight, made from tungsten, attached to the bolt, to slightly slow down the overly excessive rate of fire. The cocking handle is located at the top of the receiver cover, and does not move when gun is fired; the cocking handle slot is covered by sliding dust cover. Bolt handle is cut at the middle to provide a sighting channel. Gun is fitted with manual safety / fire selector, located on the left side of the grip, plus automatic grip safety at the rear. Full-size Uzi submachine guns were fitted either with a detachable wooden shoulder stock, or with underfolding metallic shoulder stock of indigenous design. More compact Mini-Uzi and Micro-Uzi are fitted with side-folding metallic buttstocks made from steel.
NANG THIS POST, NANG THIS POST, NANG THIS POST

LinkWithin

Related Posts with Thumbnails